Sand Making machine requires long-term maintenance of new, after all, work overload will certainly damage the machine, so the following seven points in the construction process require special attention to ensure that we have completed while also focusing on the quality of the sand making the repairs and maintenance:
1. Check the transfer whirl chamber is observed whether they were closed before driving to do one thing.
2. Be sure to check the direction of rotation of Michelle to see if the wheel is correct. Generally from the mouth of the feed direction, the direction of impeller rotation should be counterclockwise rotation, if not the case, should immediately adjust the motor wiring.
3. Sand boot process must be empty. Sand only until the normal running after startup before you can feed. Its startup sequence and shutdown sequence is exactly the opposite.
4. Is a strict requirement of the feed particles. Provisions of the absolute prohibition of the material into the hopper above, and feeding should be uniform.
5. Discharge when the device is not running, to immediately stop feeding. To avoid congestion.
6. Sand in the work process, if there is severe shock to hear noise or abnormal noise occurs, should immediately stop the checks. Prevent the emergence of a variety of other risks.
.png)
.jpg)
.JPG)
