The sealing system consists of a mounting flange welded on to the kiln shell. The two connected halves of the split case engage at the seal disk which is screw mounted to the flange. Depending on requirements, two or four packing rings are provided and a thrust ring presses them against the seal disk. A spring mechanism generates the contact force for the packing rings.
A specially designed expansion joint compensates for axial (thermal) expansion and change in the position of the kiln shell. A torque damper prevents rotation of the seal carrier assembly.
With the exception of the seal disc, the entire sealing system is free moving and runs on roller supports in the damper. The seal is able to follow any movement by the oven with the sealing function remaining intact.
The seal disc compensates for radial deflection of the rotary kiln (caused by ovality, etc.) by submerging to a greater or lesser extent into the seal housing.
Special sealing systems for rotary kilns
Packing rings (self-adjusting) with permanent spring-action for optimal, continuous contact with the seal disc, optical wear indicator
Can be pressurized with buffer gas
Optional dust extraction at the expansion joint
Optional flush fitting to remove dust deposits at the seal disc
Double-acting seal rings for use with process-compatible barrier gas or to drain toxic or aggressive gas
Cutting-edge materials, supports broad range of applications
d1 = 2,000… 8,000 mm (78“ … 315“)
p = -50 … +250 mbar (-0,72 … 3,62 PSI)
Temperature (oven surface):
t = max. 300 °C (572 °F)
Rotational speed: … 2.5 m/s (8.2 ft/s)
Radial movement capability: … 35 mm (1,38“)*
Axial movement capability: … 150 mm (5,91“)*
* Greater values on request
Metal parts: Steel S235JR (St 37-2 / 1.0037),
CrNiMo steel (1.4571) Other materials on request.